JKB-70D Double Station Blow molding machine |
Double station |
Material |
|
PE,PP,HDPE |
Max container capacity |
L |
5 |
Number of die |
set |
1.2.3.4 |
Output(dry Cycle) |
pc/hr |
800X2 |
Machine Dimension£¨L¡ÁW¡ÁH£© |
M |
3.5X2.2X2.8 |
Total weigh |
ton |
7.8 |
Clamping Unit |
Clamping force |
KN |
65 |
Platen opening stroke |
mm |
188--538 |
Platen size |
mm |
330X450 |
Max mould size(W¡ÁH) |
mm |
380X480 |
Mould thickness |
mm |
190---310 |
Power |
Max drive |
KW |
23.5 |
Total power |
KW |
40.1 |
Fan power for screw |
KW |
0.054 |
Air pressure |
Mpa |
0.6 |
Air consumption |
m³/min |
0.5 |
Average energy consumption |
KW |
14.5 |
Extruder unit |
Screw diameter |
mm |
70 |
Screw L/D ratio |
L/D |
24 |
Plasticising capacity |
Kg/hr |
70 |
Number of heating zone |
zone |
3 |
Extruder heating power |
KW |
12 |
Extruder driving power |
KW |
18.5 |
Die |
Number of heating zone |
zone |
3--5 |
Power of die heating |
KW |
4.6 |
Max die-pin diameter |
mm |
150 |
Center distance of double die |
mm |
150 |
Center distance of tri-die |
mm |
120 |
Center distance of tetra-die |
mm |
85 |
Upward-Downward of the pedestal |
Upward-downward distance |
mm |
190 |
The speed of Upward-downward |
mm/min |
30 |
Power supply |
Voltage |
V |
380/50HZ |
Voltage wave range |
£¥ |
¡À5 |